• Home
  • Neat Bar with Controller

Neat Bar with Controller

(0) No Reviews yet
$3,470.00
SKU: NEA-NEATBARPADBUNDLE-014

New

Neat Bar with Controller

Collaboration Bar for Zoom with included Controller

Features
  • Compact Meeting Room Bar
  • Camera LED
  • System LED
  • Accelerometer
  • Ambient light sensor
  • Table stand, wall mount and screen mount
  • Dual screen support
  • Security lock slot (Kensington compatible)
  • Secure boot
  • Native support for Zoom Rooms
  • Native support for Microsoft Teams Rooms on Android
Packs a punch.

Neat Bar is a simple and elegant, compactly designed yet highly capable meeting room device for Zoom or Microsoft Teams. It's perfect for bringing superior-quality audio and video to your meeting, huddle or focus rooms for up to ten people. You can mount Neat Bar above or below one or two monitors, and it comes with Neat Pad, our dynamic touch screen, which you can use to control your meetings or display room availability outside the room.

Simple set-up.

Everything you need to connect Neat Bar to your TV or monitor is in the box, so it's easy for anyone to install and set up. Just plug in the cables, and Neat Bar will auto-pair with Neat Pad. What's more, because Neat Bar and Neat Pad have auto flip, they instantly realign your view, regardless of how you mount or position them.

Just works.

Neat Bar self-activates the moment you walk in the room, immediately turning on your meeting room monitor and checking you into the room. Then with just one tap, you can wirelessly share your screen or start your meeting. It also instinctively frames you perfectly and auto releases the room when you leave (Auto check-in and release is no yet supported by MS Teams).

Snap it on.

Our snap-on mount is custom made for Neat Bar to fit snugly on top of smaller screens or monitors. The mount attaches to your screen or monitor's back with adhesive tape and is suitable for any display.

Video
  • 4x digital zoom
  • 4056*3040 (12 MP) capture resolution
  • 120 degrees horizontal field of view
  • Automatic people framing
  • Hardware accelerated video encode and decode
  • Distortion correction
  • Noise reduction
  • Chromatic aberration correction
  • Automatic white balance and color correction
Audio
  • Speakerbox for maximal tonal range with minimal distortion
  • Opposing drivers for vibration cancellation
  • Dedicated wide-angle ultrasonic tweeter
  • 3 sensor mics
  • 5 microphones angled in an end-fire array
  • Hardware accelerated audio processing
  • Beamforming
  • Echo cancellation
  • Noise suppression
  • Automatic gain control
  • Dereverberation
Electrical and environmental requirements
  • Built-in power supply
  • 100-240V ~ 50/60Hz 0.5A
  • Ambient operating temperature: 32° to 95° F (0° to 35° C)
  • Storage temperature: -4° to 140° F (-20° to 60° C)
  • Relative humidity: 10% to 90%
Networking & ports
  • WiFi
  • Bluetooth for proximity join in Microsoft Teams
  • AC Power (internal power supply)
  • Ethernet
  • USB-C for BYOD mode (USB passthrough) or input when connected to a touch screen (*)
  • 2 × HDMI-out
  • HDMI-in for screen sharing
Neat Bar
  • HDMI cable (6.5 feet / 2 meters)
  • Ethernet cable (9.8 feet / 3 meters)
  • Power cord (9.8 feet / 3 meters)
  • Mount adapter, wall mount, screen mount and table stand
  • 4 × M6 screw (1.18 inches / 30mm) for VESA mount
  • 4 × M8 screw (1.18 inches / 30mm) VESA mount for two screen setup
  • 2 × spacer to secure parallel TV mount
  • 2 mm hex wrench
  • 5 mm hex wrench
Neat Pad
  • 2 × Ethernet cable (9.8 feet / 3 meters + 16.4 feet / 5 meters)
  • PoE power adapter
  • Mount adapter, side mount and wall mount
  • 4 × M4 screw (0.39 inches / 10 mm) for the wall mount
  • 3 × M4 screw (0.26 inches / 6.7 mm) for the side mount
  • 2 mm hex wrench
  • 2.5 mm hex wrench

Ratings & Reviews

No reviews available

Be the first to Write a Review